On 6/20/19, NSF made the announcement that they were discontinuing their Automotive Parts Certification Programs. The ABPA has the same level of information received at the same time as the general public regarding the NSF decision. Until we learn more about the decision made by NSF, our members can be assured that there is continued availability of certified collision parts from other entities including long-time certifier, CAPA/Intertek. As we acquire more knowledge from NSF, we will share with our members.
Below is the announcement from NSF which can also be found here.
NSF certified parts manufactured on or before September 30, 2019 to be considered “NSF certified” for the lifetime of the part
Global public health organization NSF International today announced it will discontinue its Automotive Parts Certification program and affiliated automotive certification and registration programs, effective September 30, 2019.
“NSF International continually evaluates its programs and services and we considered many factors when making this decision,” said Lori Bestervelt, Executive Vice President and Chief Technical Officer of NSF International. “Ultimately, we are choosing to focus on programs and services that are more directly aligned with our long-term, strategic vision for the organization.”
The following NSF programs and protocols will be discontinued on September 30, 2019:
- Automotive Parts Certification Program (APCP)
- NSF Protocol P367 Light Duty Multi-Purpose Vehicle Step Bumper
- NSF Protocol P368 Vehicle Reinforcing Beam (Rebar)
- NSF Protocol P369 Vehicle Bumper Brackets
- NSF Protocol P370 Vehicle Energy Absorber
- NSF Protocol P371 Front Bumper – Multi Purpose Vehicle
- NSF Protocol P377 Automotive Exterior Lighting Parts
- NSF Protocol P378 Automotive Exterior Plastic Body Parts
- NSF Protocol P379 Automotive Exterior Sheet Metal Body Parts
- NSF Protocol P472 Front and Rear Bumper Proximity Sensors
- NSF Protocol P471 Radiator Support Assemblies
- NSF Protocol P474 Rearview Cameras
- Automotive Collision Repair Shop Certification
- NSF Protocol P458
- Automotive Parts Distributor Certification
- NSF Protocol P394
- Automotive Recycler Certification
- NSF Protocol P470
- NSF Protocol P482
- Mirror Registration
- NSF Protocol R492
- Camera Registration
- NSF Protocol R494
- Reconditioned Parts Certification
- NSF Protocol P509
- NSF Protocol P510
- NSF Protocol P511
- NSF Protocol P512
- Automotive Coating-Substrate Registration
- NSF Registration R491
- Automotive Tire Pressure Monitor Sensor Registration
- NSF Protocol P436
NSF certified parts that meet all applicable NSF certification requirements and are manufactured on or before September 30, 2019 will be considered “NSF certified” for the lifetime of the part. Manufacturers of NSF certified parts may continue selling existing inventories of NSF certified parts after September 30, 2019 as long as the parts meet all requirements and were manufactured on or before September 30, 2019. Parts manufactured after September 30, 2019 are not certified nor eligible to be certified. Any use of a sticker bearing the NSF mark on parts manufactured after September 30, 2019, is prohibited and such marked parts are not certified.
NSF certified distributors, repair shops and recyclers that meet all requirements of certification will remain certified through September 30, 2019. After that time, they must discontinue use of the NSF certification mark in advertisements and marketing material.